above and below), visual check for leaks and damage
Perform visual check as follows:
- Check engine and components in engine compartment
for leaks and damage.
- Check hoses, lines and connections of
Fuel system
Cooling and heating system
and brake system
for leaks, abrasions, porosity and brittleness.
Note:
Ensure that all malfunctions detected are rectified
within repair measures.
If fluid losses are greater than can be reasonably
expected, determine cause and repair (repair
measure)
Engine oil level, check
Note:
Observe waste disposal regulations!
After stopping engine, wait at least 3 minutes to
allow oil to flow back into oil pan.
Pull out dipstick, wipe off with a clean cloth and re-
insert dipstick again up to stop.
- Pull out dipstick again and read oil level.
Page 31 / 37
Description of work (part 1 of 2)
