12.VW.2210.1026_BA_V01_EN
VAS 6558/9-4
7
EN | Safety
Intended use
Use the product only in accordance with this operating manual; otherwise the electrical
hazard protection provided by the product can no longer be guaranteed.
The product is used to adapt the VAS 6558/VAS 6558A high-voltage measurement module
to the vehicle-side plug connection specified by the vehicle manufacturer in the guided fault
finding.
The product may only be used on high-voltage systems that have been certifiably de-
energized.
The product must not be used to test that the circuit is de-energized.
The product is suitable for the following measurements:
•
Insulation resistance measurement
•
Continuity measurement
In this operating manual, vehicle manufacturers are exclusively defined as vehicle
manufacturers in the Volkswagen Group.
Any use beyond what is listed here is prohibited.
Requirements for the target group
Only qualified personnel may work with this product!
In this operating manual, qualified personnel is defined as personnel meeting all
requirements for working on high-voltage systems applicable in the country of operation, as
defined by:
•
Regulations applicable in the country of operation
•
Qualification according to DGUV 200-005 level 2 or higher, or equivalent
•
Specifications from the vehicle manufacturer and/or the operator.
At all times while using the product, staff must wear the personal protective equipment
prescribed by the vehicle manufacturer for work on high-voltage systems.
Duties of the operator
The operator is responsible for ensuring that all staff working with the measurement adapter
fulfills the requirements for the target group.
The operator is also responsible for ensuring that the following conditions are met:
•
The measurement adapter is always in perfect working order.
•
The regular inspection intervals for the measurement adapter are observed and
recorded.
