INSTALLATION & OPERATION
1.
Unpack your FreshAir Focus from its carton and remove protective material.
Inspect the unit for any visible signs of damage. If damage is evident, repack and
contact your Vollara Distributor.
2.
Plug unit into any power outlet and move switch to the “ON” position.
3.
Press the button on the front of the unit to activate the purification mode. The
blue light will illuminate for 30 minutes with a steady blue light. Press the button a
second time to activate purification for 4 hours; the blue light will blink on and off.
4.
The purification function can also be turned off manually be pressing the button
until the blue light is off.
5.
To turn the unit off, move the switch to “OFF” position.
6.
The use of this product and proper cleaning is effective against most odors and
airborne particles. FreshAir Focus will cause dust and other particles to settle out
of the air and onto surfaces where they can be taken away during normal cleaning.
NOTE:
When the unit is in the “ON” position, it means the ionizer is working.
The ionizer will continue working until the unit is turned off.
MAINTENANCE
The FreshAir Focus is low maintenance. Once every month the air inlet and outlet must be
vacuumed. Use an accessory brush attached to a vacuum cleaner running on its lowest
power setting. Disconnect the unit and gently brush back and forth over the openings to
help remove internal and external contamination. Do not vacuum the unit for more than 10
seconds at a time or blow air into the unit.
Periodically wipe the unit with a dry cloth. Do not spray with cleaning products or allow
mists or other types of moisture to enter unit. Cleaning products or moisture will damage
the unit and such damage is not covered by the product warranty.
DISPOSAL
Do not dispose of unit in the normal household trash. Please dispose of it separately at a
location designated for electronic devices.
