Vollrath STL-80SS Operator'S Manual Download

Page: 7 / 74

Congratulations on your purchase of the Flavor
Burst Stoelting-Ready flavoring system. As a
food and beverage provider, your customers
are your greatest asset. Your primary concern
must be the health and welfare of your
customers. This manual provides everyday
operating guidelines and procedures. Special
functions have been incorporated into the
equipment to provide simple and effective
cleaning and sanitizing of your unit. We urge
you to follow these instructions carefully and
maintain strict sanitary practices in your daily
operating routine.

The Flavor Burst system is added to a soft
serve freezer to inject concentrated flavorings
throughout soft serve product as it is dispensed.
Dispensing Flavor Burst product is very simple.
Select a flavor from the Touch Panel and draw
the product. The Flavor Burst system will
automatically flavor the product at the spout.
You can also have multiple flavors per serving.
Simply select the flavors from the Touch Panel
and draw the product. The system will switch
from one flavor to the next in a smooth,
continuous motion, layering the serving with
different, delicious flavors. The STL-80SS
model is an 8-flavor system with a tall cabinet
and external sanitizer tank.

Flavor Burst

syrup is stored within the

equipment cabinet in 1-gallon disposable bags.
Proper syrup injection rate is maintained by
adjusting the flavor level on the system Touch
Panel.

Components of the STL-80SS system should
be cleaned daily to ensure the highest standard
of sanitation. When your equipment is
delivered or if it has been unused for more than
24 hours, follow the DAILY OPENING
PROCEDURES.

NOTE:

PARTS AND PART NUMBERS MAY

VARY FROM WHAT IS SHOWN AND LISTED.
CONTACT STOELTING COMPANY’S WHITE
GLOVE SERVICE IF YOU HAVE ANY
QUESTIONS. Phone 800-319-9549

Always follow these safety precautions when
operating the Flavor Burst

system:

DO NOT

operate the system without

reading this operator’s manual. Failure to follow
this instruction may result in equipment
damage, poor system performance, health
hazards, or personal injury.

DO NOT

operate the system unless it is

properly grounded. Failure to follow this
instruction may result in electrocution.

DO NOT

operate the system with larger

fuses than specified on the system data label.
Failure to follow this instruction may result in
electrocution or damage to the machine.
Consult your electrician.

DO NOT

put objects or fingers in the

door spout. Failure to follow this instruction may
result in contaminated product or personal
injury from blade contact.

The STL-80SS cabinet system must be

placed on a level surface capable of supporting
at least 220 lbs of weight. Failure to comply
may result in personal injury or equipment
damage.

DO NOT

place more than 25 lbs of

weight on top of the FB 80M cabinet. Failure to
comply may result in personal injury or
equipment damage.

DO NOT

install the unit in an area where

a water jet could be used, and do not use a
water jet to clean or rinse the system. Failure to
follow these instructions may result in serious
electrical shock.

INTRODUCTION

SAFETY PRECAUTIONS