Vollrath Stoelting O111I, Operator'S Manual

Safety Alert Symbol:

This symbol 

Indicates danger, warning or caution. 

Attention is required in order to avoid serious per-
sonal injury. The message that follows the symbol 
contains important information about safety.

Signal Word:

Signal words are

 distinctive words used throughout 

this manual that alert the reader to the existence and 
relative degree of a hazard.

CAUTION

The signal word “CAUTION” 

indicates a potentially 

hazardous situation, which, if not avoided, may result 
in minor or moderate injury and equipment/property 
damage.

A Few Words About Safety

Safety Information

 Read and understand the entire manual before 
operating or maintaining Stoelting equipment.

This manual provides the operator with information 
for the safe operation and maintenance of Stoelting 
equipment. As with any machine, there are hazards 
associated with their operation. For this reason safety 
is emphasized throughout the manual. To highlight 
specifi c safety information, the following safety defi ni-
tions are provided to assist the reader.

The purpose of safety symbols is to attract your at-
tention to possible dangers. The safety symbols, and 
their explanations, deserve your careful attention 
and understanding. The safety warnings do not by 
themselves eliminate any danger. The instructions 
or warnings they give are not substitutes for proper 
accident prevention measures.

If you need to replace a part, use genuine Stoelting 
parts with the correct part number or an equivalent 
part. We strongly recommend that you do not use 
replacement parts of inferior quality.

WARNING

The signal word “WARNING” indicates a potentially 
hazardous situation, which, if not avoided, may result 
in death or serious injury and equipment/property 
damage.

CAUTION

The signal word “CAUTION” not preceded by the 
safety alert symbol indicates a potentially hazardous 
situation, which, if not avoided, may result in equip-
ment/property damage.

NOTE (or NOTICE)

The signal word “NOTICE” indicates information or 
procedures that relate directly or indirectly to the 
safety of personnel or equipment/property.