VoloAccess™
User Manual
Copyright © Vololink Pty Ltd 2006-2010
V1.43 July 2010
Page 46 of 78
Configuring Supplementary Services using the Phone Keypad
Introduction
Support of Supplementary Services is dependent on the SIM installed in the VoloAccess and also on the
network. For this reason, all of the documented services may not be available.
The VoloAccess supports the following list of Supplementary Services.
●
Inbound Caller ID
●
Outbound Caller ID
●
Call Waiting
●
Call Divert
●
Call Barring
●
Multi-party Calls
●
Call Transfer
●
Call Holding
●
Call Waiting
Throughout this section the instructions will refer to the
Flash
key, which can be labelled as
Flash
or
Recall
on a telephone.
Not all telephones have a
Flash
key. In which case, use the
Telephone
page in Admin to configure
Telephone Supplementary Services.
When you see this icon
in the instructions, lift the telephone handset Off Hook.
When you see this icon
in the instructions, replace the telephone handset On Hook.
Keypad commands will work with a DTMF capable (tone dialling) phone only.