37
15.5
Fixed blade replacement
•
Follow the procedure at par. 15.3 for moving blade replacement up to point (12).
•
Remove fixed blade screw (1) and pull out the fixed blade (2):
•
Repeat the inverse procedure to reassemble the tool.
16.
Storage
•
Don’t disport the battery to hot or cold environment.
•
Remove the battery from the device if storage for a long time.
•
Storage the battery and charger into box to keep it away from hot temperature, dust and humidity.
Check switch is in OFF position before storage.
•
Battery should be stored in dry environment, see below:
Storage less than 1 month
-20°C ~ +60°C
Storage less than 6 month
-10°C ~ +35°C
Storage over 6 month
0°C ~ +30°C
•
Battery should be kept at least at 1.5m from any possible flammable substance
.
•
Maintain the battery; please full charging before storage, charging battery every 6 months when
storing for a long time.
•
Don’t operate switch at storage.
17.
Tool indications and warning signals
17.1
Indication of charger
Li-Battery
LED
Battery capacity
Voltage
Three squares green
80%-100%
34 V <Vcc ≤ 42 V
Two squares green
50%-80%
One squares green
30%-50%
One squares red
Below 30%
Vcc ≤ 34 V
Charger
Indication
Situation
Red
Charging
Green
Charging finished
Summary of Contents for KV500
Page 124: ...124 ...
