INSTALLATION INSTRUCTIONS
w w w . v o l t l i g h t i n g . c o m
Install Rod to Stake
2
Stem
Stake
Pigtail
Wireway Slot
Wire Connection
3
Strip both of the leads from the luminaire pigtail. Using two wire
connectors (sold separately), connect the leads from the luminaire to
the leads of the main supply cable.
Pigtail
Main Supply Cable
Wire Connectors
Clear away an area in the ground at
the wireway slot on the top of the
stake. Lay the luminaire pigtail into
the wireway slot and screw the stem
onto the stake. If the fixture does
not look straight, adjust by pushing
or pulling on the stake only. Use
a bubble level against the side of
the stem to make sure the stem is
perpendicular to the ground.
VOLT
®
2-in-1 Tiki-Brass Torch Light
VPL-380-BBZ
