customersupport@voltlighting.com • 813.978.3700
Install Shade Assembly
5
Attach the shade assembly onto the
top end of the stem as shown. Tighten
the set screw until snug to secure both
pieces together.
Set Screw
Shade
Assembly
Stem
Install Bulb
4
Socket
Lamp
Install/Replace Bulb
Please reverse Step 5 - Step 4 to expose the lamp and replace it with the
correct wattage and type marked on the fixture label. Then, reinstall the
shade assembly.
IMPORTANT: The Bulb must be protected from moisture and dust at all
times. Always reinstall the shade assembly when moved.
Insert the lamp with the correct wattage
and type marked on the luminaire label.
CAUTION: Do not exceed maximum
wattage marked on luminaire label.
NOTE: DO NOT touch lamp with bare
hands. Use soft cloth to handle lamp.