Wire Connection and Fixture Installation
9
Install/Replace Lamp
Please reverse Step 3 - Step 5 to expose the lamp and replace it with the
correct wattage and type marked on the fixture label. Reinstall the lens
and glare guard.
Loosen the screw at the joint
and adjust the fixture body to
the desired direction. Once the
desired direction is achieved,
tighten the set screw until snug.
Adjust Lamp Direction
10
Fixture Body
Set Screw
Set Screw
Cap
Post
Wire
Connector
Supply
Wires
Fixture
Wires
Allow enough wire from the
fixture for adjustment purposes.
Connect the wires from
the fixture into the wiring
terminal. The white wire goes
to the “Neutral” terminal; the
black wire goes to the “Live”
terminal; and the green wire
goes to the “Ground” terminal.
Fix them in place with the
connector screws.
customersupport@voltlighting.com • 813.978.3700
- 7 -
