9
1. Headlight switch
Low beam on- The light switch is turned
downwards. In this position, the low beam
and tail light are switched on.
High beam on- The light switch is turned
upwards. In this position, the hight beam and
tail light are switched on.
2. Turn signal switch
Left turn signal on. To switch off the turn
signal, press the switch towards the switch
case.
Right turn signal on. To switch off the turn
signal, press the switch towards the switch
case.
3. Horn Button
Horn is operated when this button is pres-
sed.
4. Speed Limiter
Switch on to select the top limit speed. The
indicator will be lighting while activated, and
the bike won’t allow to overpass the selected
speed. To deactivate, switch again the Speed
Limiter and the light indicator will disappear.
5. Inside trunck switch
The inside trunck door is opened when this
button is pressed
6. Rear Brake lever
Rear brake is engaged using the left hand
brake lever.
OPERATION COMPONENT LOCATION
This section shows the location of all controls, gauges, and indicators you would
normally use before or while riding your Volta.
Left side of the handlebar:
BOX
1
2
3
4
5
6