background image

 •   Avoid the following unfavourable ambient conditions at the installation point or 

during transportation or storage:

 

  -  Dampness or excessive humidity

 

  -  Extreme cold or heat

 

  -  Direct sunlight

 

  -  Dust or flammable gases, fumes or solvents

 

  -  Strong vibrations

 

  -   Strong magnetic fields such as those found in the vicinity of machinery or 

loudspeakers

 

•   Do not operate the device in environments where there are high levels of dust, 

flammable gases, vapours or solvents. There is a danger of fire and explosion!

 

•   Ensure that the rechargeable battery is ventilated adequately at the place of set-

up. The charger and the battery must be set up/placed such that air circulation is 

possible. Never cover the charger and the battery.

 

•   Never insert objects into any openings that may be present in the housing; lethal 

hazard due to electric shock!

 

•   Condensation may form when the product is brought from a cold room into a 

warm one. Wait until the product has reached room temperature before con-

necting it to the mains voltage and switching it on. This may take several hours. 

Otherwise, this may not only destroy the product, but there is also the risk of a 

life-threatening electric shock!

 

•   This product should never be touched with wet hands. Otherwise, there is the risk 

of a fatal electric shock!

 

•   The charger and the charging cable must not be pinched or damaged by contact 

with sharp edges. 

 

•   Do not use the product if it is damaged. There is a risk of a life-threatening electric 

shock! 

 

  Safe operation can no longer be assumed if:

 

  -  the product shows visible signs of damage

 

  -   the product does not work at all or works poorly (leaking smoke or a smell of 

burning, audible cracking noises, discolouration to the product or the adjacent 

surfaces)

 

  -  the product was stored under unfavourable conditions

 

  -  it was exposed to heavy loads during transport

 

•   If the product is damaged, do not touch it; there is a danger to life from electric 

shock! First, turn off the mains voltage to all poles of the mains socket to which 

the product is connected (e.g., switch off at the corresponding circuit breaker or 

remove the safety fuse, then turn off at the ELCB). Only then should you unplug 

the charger from the mains socket. Discontinue use of the product, take it to a 

specialised workshop or dispose of in an environmentally friendly manner.

 

•   Use the product only in a temperate climate, never in a tropical climate.

 

•   Do not leave packaging material carelessly lying around. It may become a dan-

gerous plaything for children.

 

•   Also observe the safety and operating instructions of the rechargeable battery that 

is connected to the product.

 

•   Pay attention to the charging instructions of the respective battery manufacturer 

when charging.

 

•   In the case of improper handling (wrong battery type; wrong voltage range or 

reversed polarity and simultaneous failure of the safety features of the charger), 

the rechargeable battery can be overcharged or destroyed. In the worst case, the 

rechargeable battery can explode and thereby cause serious damage.

 

•   Keep transmitters (mobile phones, transmitters for models, etc.) away from the 

charger because the resulting radio transmission can disturb the charging process 

or damage the charger and thereby also the rechargeable battery.

 

•   Do not leave the charger, and the rechargeable batteries that are connected to it, 

unattended while in operation.

 

b) other information

 

•   If you have doubts about how the product should be operated, or about safety or 

the connection, consult an expert.

 

•   Maintenance, adjustment and repair work may be carried out only by an expert or 

a specialist workshop.

 

   If in doubt about how to connect the device correctly, or should any questions 

arise that are not answered in these operating instructions, please contact our 

technical service or another specialist.

G

 oPErATING INSTrUcTIoNS

AUTomATIc cHArGEr Vc 12V / 4A

ITEm No. 1339997

INTENDED USE

The product is intended to charge lead rechargeable batteries of the types lead-gel, lead-acid 

or lead-fleece with a nominal voltage of 12 V and a capacity from min. 4 Ah up to max. 120 Ah 

with an automatic charger. The device connects to the battery via a charging cable with alliga-

tor clamps or with cable eyelets. 
Only use the charger on standard household AC voltages 220 - 240 V/AC. The charger is 

protected against overload, polarity inversion and short-circuit.
For safety and approval reasons (CE), you may not convert and/or alter the product. Non-

rechargeable batteries (e.g., zinc-carbon, alkaline, etc.) or other rechargeable battery types 

(e.g., NiMH, Lilon, etc.) are not to be connected and recharged.
If you use the product for purposes other than those described above, the product may be 

damaged. Furthermore, improper use may cause risks such as short-circuits, fire, explosion, 

electric shocks, etc. Please read the operating instructions carefully and do not discard them. If 

you pass the product on to a third party, please hand over these operating instructions as well.
This product complies with the applicable National and European requirements. All names of 

companies and products are the trademarks of the respective owners. All rights reserved.

PAcKAGE coNTENTS

•  Charger
•  Charging cable with removable alligator clamps
•  Operating instructions

SAFETY INSTrUcTIoNS

  Please read the operating instructions carefully and pay particular attention 

to the safety instructions. we do not assume liability for injuries/material 

damages resulting from failure to observe the safety instructions and the 

information in these operating instructions regarding the proper handling of 

the product. Furthermore, in such cases, the warranty/guarantee will be null 

and void.

 

a) Persons / product

 

•   This product is not a toy. Devices operated on mains voltage should not be used 

by children. Therefore, be especially careful when children are around. 

 

   Children may try to poke objects into any available openings in the charger. Not 

only does this damage the product, but it also poses an injury hazard as well as a 

risk of fatal electrical shock!

 

•   The product is constructed according to Protection Class II. Only a standard 

safety mains socket connected to the public supply grid may be used as the volt-

age source. 

 

   The outlet used for the connection must be located in direct proximity to the 

charger and easily accessible.

 

•   The product must not become damp or wet; it is only intended for use in dry, 

indoor locations. 

 

•   Never pour any liquids above or next to the product. Do not place containers with 

liquids, such as glasses, vases, etc., on or alongside the charger. Liquids may 

seep into the casing and thus impair the electrical safety of the device. Further-

more, there is a significant risk of fire or of a lethal electric shock! If any liquid has 

still managed to enter the device, immediately turn off the power supply to the 

mains socket at which the product is connected (turn off the fuse / circuit breaker / 

residual current operated circuit breaker of the associated circuits). Only then can 

you unplug the product from the mains socket and contact a specialist. Do not use 

the product any longer. 

VErSIoN 10/15

Summary of Contents for 1339997









Reviews: