39
After confirming the last input position, the hours of the starting time for electricity tariff 2 (for
example night-time electricity) flash.
• Set the hours of the starting time for electricity tariff 2 with the “
” (4) or “
” (5) button.
• Briefly press the “SET” (1) button, the minutes of the starting time for electricity tariff 2 flash.
• Set the minutes of the starting time for electricity tariff 2 with the “
” (4) or “
” (5)
button.
• Press the “SET” button (1) briefly for confirmation. The display stops flashing and the price
for electricity tariff 1 set before will be shown.
• By briefly pressing the “
” button (5), you can set the CO
2
value (“GHG” = greenhouse
gas), see next section e). If you want to correct the electricity tariff settings, briefly press the
“SET” button (1) and proceed as described above.
If you want to close the set-up mode, hold the “SET” button (1) pressed for 3 seconds
(or do not press a button for one minute).
