37
7. Operating elements
6
7
8
9
10
1
2
4
5
3
11
12
1 SELECT button
2 Non-contact voltage sensor area
3 Torch light
4 LC display
5 Rotary switch
6 Battery compartment
7 Foldable stand
8 V socket (
)
9 COM socket (reference potential)
10 10A max current measuring socket
11 Torch button
12 HOLD and backlight button
8. LC display indications and symbols on the device
The following symbols and information are present in the LC display (4) or on the device.
Battery change symbol. When this symbol appears in the LC display (4), the battery must be replaced
to avoid measuring errors!
Lightning icon for voltage measuring
AC
Symbol for alternating current on LC-display
DC
Symbol for direct current on LC-display
Symbol for active hold function when it is active
Symbol for automatic shutdown active
Auto
The automatic range selection is active (for AC voltage and current, DC voltage and current,
resistance, frequency)
Symbol for the diode test
Symbol for the acoustic continuity tester
Ω, kΩ, MΩ
Ohm (unit of electric resistance), Kilo-Ohm (exp.3), Mega-Ohm (exp. 6)
Hz, kHz
Hertz (unit of frequency), Kilo-Hertz (exp. 3)
A , mA, μA
Ampere (unit of electric current), Milli-Ampere (exp.-3), Micro-Ampere (exp. -6)
V, mV
Volt (unit of electric voltage), Milli-Volt (exp. -3)
