LED indicator
Description
No LED light is on.
LED-alarm was disabled during con-
figuration.
9. Initial operation
a) Protective cap
The data logger is only dust tight and jet water pro-
tected with attached protective cap (12) and rubber
seals (9, 10). This protection allows permanent logging
operation in damp rooms and outdoors.
• Only remove the protective cap for replacing the battery or
reading the data on the computer.
• Remove the protective cap by pulling it off from the data log-
ger. The protective cap fits tightly due to the rubber seal (10).
• Place the protective cap tightly back onto the data logger.
b) Connect to the computer
• Remove the protective cap (12) from the data logger.
• Connect the data logger to the USB port of your computer.
• The computer recognizes the new hardware. The model type
of your data logger appears as a mass storage device on your
computer.
80
