1. Introduction
Dear customer,
Thank you for purchasing this product.
This product complies with the statutory national and European requirements.
To maintain this status and to ensure safe operation, you as the user must observe these
operating instructions!
These operating instructions are part of this product. They contain important notes on
commissioning and handling. Also consider this if you pass on the product to any third
party. Therefore, retain these operating instructions for reference!
If there are any technical questions, please contact: www.conrad.com/contact.
2. Explanation of symbols
The symbol with the lightning in the
triangle is used if there is a risk to
your health, e.g. due to an electric
shock.
The symbol with the exclamation
mark in the triangle is used to indi-
cate important information in these
operating instructions. Always read
this information carefully.
The arrow symbol indicates special
information and advice on operation.
This device is CE-compliant and
meets applicable European direc-
tives.
Protection class 2 (double or rein-
forced insulation, protective insula-
tion).
Earth ground
This device is UK conformity as-
sessed and meets applicable Great
Britain directives.
CAT II It is applicable to test and measuring
circuits connected directly to utiliza-
tion points (socket outlets and simi-
lar points) of the low-voltage MAINS
installation.
CAT III It is applicable to test and measuring
circuits connected to the distribution
part of the building’s low-voltage
MAINS installation.
Direct current
Alternating current
36
