25
9 Battery
9.1 Insert batteries
1.
Remove the battery compartment cover by releasing the locking screw. Be care
-
ful not to lose the screw.
2.
Insert 4x AA batteries matching the polarities shown.
3.
Replace the compartment cover.
9.2 Battery voltage check
Important:
– Replace the batteries before they are completely spent.
– Power shut off due to low batteries will result in data loss.
1. Press the
button to display the battery voltage.
- Normal range is: 4.8 to 6.0 V.
- The replace battery symbol will show if the voltage is: < 4.8 V.
2. Press
to exit battery voltage check.
10 System settings
Configure various settings through the setup menu before using the device.
1. Press
and then ▲/ ▼to select a setting.
2. Press
to confirm the selection or press
to exit the setup menu.
- Press ▲/ ▼to adjust values.
- Press
to toggle through settings.
3. Press
to save the setting and return to the main menu.
