68
9.2 Clamp
R
S
T
U
V
W
X
R. Current clamp sensor
S. Adjuster for DC zero calibration
T. Battery compartment (at rear)
U. Tangible grip range marking
V. Clamp opening lever
W. Operating switch
X. Safety connection plug
10 Control dial
Use the control dial to select the measurement mode.
Automatic range selection (“Au-
torange”) is enabled and the range will
be automatically selected.
Æ
The measurement ranges must be
selected manually.
Æ
Always start with the largest meas-
urement range, and then switch to
a smaller range if necessary.
The control dial features a function
button.
Æ
Use the
SEL
/
button to switch to sub-modes when the measuring mode
has more than one function
To turn the multimeter off, move the control dial to the
OFF
position. Always turn
the multimeter off when it is not in use.
