76
13 Troubleshooting
Error
Possible cause
Solution
The multimeter does not
work.
Are the batteries
empty?
Check the status. Re-
place the batteries.
The measured value
does not change.
Have you selected the
wrong measurement
mode (AC/DC)?
Check the display (AC/
DC) and select another
mode if necessary.
Did you use the wrong
measurement sockets?
Check that the test leads
are connected to the
correct measurement
sockets.
Is the hold function
enabled?
Disable the hold function.
The multimeter cannot take measurements in the 10 A range
The multimeter cannot
take measurements in
the 10 A range
Is the fuse in the 10 A input defective? Is the fuse in the 10 A input defective? Is the fuse in the 10 A input defective?
Is the fuse in the 10 A
input defective?
Is the fuse in the 10 A input defective?
Check the 10 A fuse.
The multimeter cannot take measurements in the mA/µA range The multimeter cannot take measurements in the mA/µA range
The multimeter cannot
take measurements in
the mA/µA range
Is the fuse in the 10 A input defective? Is the fuse in the 10 A input defective? Is the fuse in the 10 A input defective?
Is the fuse in the
mAµA range defec-
tive?
Is the fuse in the 10 A input defective?
Check the 600 mA fuse.
