75
9.5 Setting Electricity Tariff 1 and 2
You can set two different electricity tariffs for the cost calculation
(e.g. for day or night electricity). Make sure you set the same price
for both tariffs and leave the start time at 00:00:00 if you only have
one electricity tariff.
Proceed to the next step if you have set the 12h/24h format
and the time before setting the electricity tariff (see chapter
9.4).
Or access the setup mode, as described in chapter 9.2.
Pressing the
button twice takes you to the first electricity
tariff setup menu (see next step).
Pressing the
button briefly toggles between the currency,
electricity price input and start time settings in succession for
both electricity tariffs.
You cannot include extra times for switching between day
and night electricity (weekends, public holidays).
Use the button or
to modify the respective flashing
value.
When the display is not flashing, briefly press the
button
to skip to the next setting or briefly press the
button to
exit the setup menu.
SET: Press to switch
: Edit values
< <
SET: Press to switch
: Edit values
< <
SET: Pres s to switc h
: Edi t values
< <
