32
Press button to switch to the area for setting the standby power.
c) Setting the standby power
1. Press SET button once. The power value starts flashing (fig. 20 + 21).
2. This function is used to set the standby power value, which is useful for the total energy
calculation. Use or buttons to set the value and press SET to confirm. Set each digit
separately. The setting range is 0.001 - 9.999W.
3. After setting the normal standby power the display will switch to the area for setting the
low-energy standby power. The display will show indicating the low-energy standby power
(fig. 22).
4. Perform the setting following the same procedure as for normal standby power and press SET to
confirm your setting. The setting range is 0.001 - 9.999W.
fig. 20
fig. 21
fig. 22
W
W
W
Press button to switch to the area for setting the GHG/CO
2
alarm limit.
d) Setting the rate of GHG/CO
2
1. Press SET button once. The “GHG” (greenhouse gas) / “CO
2
” value starts flashing (fig. 24).
2. Use or buttons to set the value and press SET to confirm. Set each digit separately.
fig. 24
fig. 23
Press button to switch to the area for setting the OVERLOAD limit.
Summary of Contents for 4000PRO
