oPERATING INSTRUCTIoNS
Version 04/12
PoWER PACK
Item No. 51 27 78
12 V / 300 mA
Item No. 51 27 98 12 V / 1500 mA
Item No. 51 27 79
24 V / 150 mA
Item No. 51 27 99 24 V / 750 mA
Item No. 51 27 80
12 V / 500 mA
Item No. 51 28 80 5 V / 2250 mA
Item No. 51 27 81
24 V / 250 mA
Item No. 51 28 86 12 V / 2250 mA
Item No. 51 27 82
5 V / 2100 mA
Item No. 51 28 90 24 V / 1120 mA
Item No. 51 42 07
18 V / 1500 mA
Item No.
51 42 11 9 V / 2250 mA
INTENDED USE
1.
The power pack serves as voltage supply for low-voltage devices with matching DC jacks. It is intended for
connection to common household mains voltage (100 - 240 V/AC, 50/60 Hz). A galvanic separated DC voltage
is applied to the output. The power consumption of the consuming device many not exceed the nominal voltage
of the respective power pack (depends on the type). The product has a protection against short circuit and
overload.
This product fulfils European and national requirements related to electromagnetic compatibility (EMC).
CE conformity has been verified and the relevant statements and documents have been deposited at
the manufacturer.
Unauthorised conversion and/or modification of the device are inadmissible because of safety and approval
reasons (CE). Any usage other than described above is not permitted and can damage the product and lead to
associated risks such as short-circuit, fire, electric shock, etc. Please read the operating instructions thoroughly
and keep them for further reference.
CoNTENT of DELIVERy
2.
Power pack
•
Operating instructions
•
SAfETy INSTRUCTIoNS
3.
We do not assume liability for resulting damages to property or personal injury if the
product has been abused in any way or damaged by improper use or failure to observe
these operating instructions. The warranty/ guarantee will then expire!
The icon with exclamation mark indicates important information in the operating
instructions. Carefully read the whole operating instructions before operating the device,
otherwise there is risk of danger.
Persons / Product
The product is not a toy and should be kept out of reach of children!
•
When used in conjunction with other devices, observe the operating instructions and safety notices of
•
connected devices.
The product must not be subjected to heavy mechanical stress.
•
The product must not be exposed it to extreme temperatures, direct sunlight, intense vibration, or
•
dampness.
Never touch the device with wet or moist hands. There is a danger of electrocution.
•
On commercial premises, the accident prevention regulations of the relevant professional insurance
•
association for electrical systems and operating materials are to be observed.
Operation in unfavourable ambient conditions is not permitted. Adverse ambient conditions are:
•
moisture or excessive humidity
-
dust and combustible gases, vapours or solvents
-
Since the device generates heat when operating, ensure that it is adequately ventilated. The housing must
•
not be covered!
If you have reason to assume that safe operation is no longer possible, then disconnect the device immediately
•
and secure it against inadvertent operation. It can be assumed that safe operation is no longer possible if:
the device is visibly damaged,
-
the device no longer functions
-
it has been stored for long periods of time under unfavourable conditions or
-
it has been subject to considerable stress in transit.
-
Never switch the device on immediately after having taken it from a cold to a warm environment. Under
•
adverse conditions, the resulting condensation could destroy the device. Allow the device to reach room
temperature before switching it on.
Power units are not designed for application to human beings or animals.
•
Miscellaneous
Repair works must only be carried out by a specialist/ specialist workshop.
•
If you have queries about handling the device, that are not answered in this operating instruction, our
•
technical support is available under the following address and telephone number: Voltcraft
®
, 92242
Hirschau, Lindenweg 15, Germany, phone 0180 / 586 582 7
oPERATIoN
4.
Periodically check the technical safety of the device, e.g. check for damage to the housing
etc.
Always lay the cable so that nobody can trip over or become entangled in it. This poses
a risk of injury.
Connect the DC plug of the power pack with the DC jack on the low-voltage device.
1.
The polarity cannot be altered. The plug has the fixed polarity „inside plus (+), outside minus (-)“.
2.
Make sure that the consumer is switched off when connected to the poower pack.
3.
Plug the power pack into a standard domestic wall socket. Correct operation is signaled at the power pack
4.
by a LED.
To remove the consumer, proceed in reverse sequence.
5.
TRoUBLESHooTING
5.
By purchasing the power pack you have acquired a product that has been designed to the state of the art and
is operationally reliable. Problems and malfunctions can occur nevertheless. We would therefore like to show
how you can rectify certain faults yourself:
observe the safety instructions by all means!
Problem
Cause
Solution
The power indicator
is not lit.
No mains voltage.
Check the circuit breaker of the power outlet.
Check the correct fit of the power outlet.
Power pack overloaded.
Remove the consumer and check the
technical data.
DISPoSAL
6.
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
TECHNICAL DATA
7.
Valid for all item no.
Operating voltage:
100 - 240 V/AC, 50/60 Hz
Output voltage tolerances:
±10 % (full load)
max. +5 % (no load)
Cable length:
1.8 m
Plug Ø:
5.5 mm (outer) / 2.1 mm (inner)
Item no.
51 27 78
51 27 79
51 27 80
51 27 81
Output voltage:
12 V/DC
24 V/DC
12 V/DC
24 V/DC
Output current:
300 mA
150 mA
500 mA
250 mA
Operating temperature:
0 ºC to +35 ºC, 20 % to 85 % RH
Storage temperature:
-20 ºC to +50 ºC, 10 % to 90 % RH
Dimensions (W x H x D):
43 x 69 x 60 mm
Weight:
70 g
Item no.
51 27 82
51 27 98
51 27 99
Output voltage:
5 V/DC
12 V/DC
24 V/DC
Output current:
2100 mA
1500 mA
750 mA
Operating temperature:
0 ºC to +40 ºC, 20 % to 85 % RH
Storage temperature:
-20 ºC to +60 ºC, 10 % to 90 % RH
Dimensions (W x H x D):
51 x 73 x 82 mm
Weight:
140 g
Item no.
51 28 80
51 28 86
51 28 90
Output voltage:
5 V/DC
12 V/DC
24 V/DC
Output current:
2250 mA
2250 mA
1120 mA
Operating temperature:
0 ºC to +35 ºC, 20 % to 85 % RH
Storage temperature:
-20 ºC to +50 ºC, 10 % to 90 % RH
Dimensions (W x H x D):
51 x 77 x 88 mm
Weight:
200 g
Item no.
51 42 07
51 42 11
Output voltage:
18 V/DC
9 V/DC
Output current:
1500 mA
2250 mA
Operating temperature:
0 ºC to +35 ºC, 20 % to 85 % RH
Storage temperature:
-20 ºC to +50 ºC, 10 % to 90 % RH
Dimensions (W x H x D):
51 x 77 x 88 mm
Weight:
200 g
These operating instructions are published by Voltcraft®,
Lindenweg 15, D-92242 Hirschau/ Germany, Phone +49 180 586 582 7.
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the
capture in electronic data processing systems require the prior written approval by the editor. Reprinting,
also in part, is prohibited.
The operating instructions reflect the current technical specifications at time of print.
We reserve the right to change the technical or physical specifications.
© Copyright 2012 by Voltcraft®.
V3_0412_02-JU
