Data Storage on SD Card
The most important operating data (DC input voltage, AC output
voltage, current output, output status (ON/OFF)) can be stored
on any common SD storage card as of 1 GB (FAT16/FAT32-for-
matted) with date and time stamp at an interval of 30 seconds.
No “SDHC” memory cards can be used. They
are not recognised by the system. The display
indicates the error message “SD CARD
ERROR!”
Inserting the SD Card
Insert the SD memory card with the
contacts upwards into the SD slot (1).
The memory card is recognised and
mounted automatically.
The display shows the message “SD
CARD MOUNTED!” and the memory
card symbol is displayed in the upper
left of the display.
Confirm the message by pressing the “SET“ button. Data is stored
while the converter is switched on or until it is terminated manually.
43
