• Keep all provided small parts away from children and pets; there is a risk of
swallowing.
• Never use the product immediately after it has been brought from a cold room
into a warm one. The condensation generated could destroy the product. The
power supply unit also involves danger to life by electric shock! Allow the device
to reach room temperature before connecting and using it. This may take several
hours.
•
Never pour any liquids over electrical devices or put objects filled with liquid right
next to the device. If liquid or an object enters the interior of the device never-
theless, first power down the respective socket (e.g. switch off circuit breaker)
and then pull the mains plug from the mains socket. Do not operate the product
anymore afterwards, but take it to a specialist workshop.
• Disconnect the product from the wall socket and the connected appliance when
not in use.
•
The product generates heat during use. Ensure sufficient ventilation and do not
cover the product during use.
• The wall socket used for connecting the product must be easily accessible.
• Only connect the power adapter to a normal mains socket connected to the public
supply. Before plugging in the power adapter, check whether the voltage stated
on the power adapter complies with the voltage of your electricity supplier.
• Never connect or disconnect power adapters if your hands are wet.
• Never unplug the power adapter from the mains socket by pulling on the cable;
always use the grips on the plug.
• When setting up the product, make sure that the cable is not pinched, kinked or
damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them.
This poses a risk of injury.
• For safety reasons, disconnect the power adapter from the mains socket during
storms.
• If the power adapter is visibly damaged, do not touch it. Risk of fatal injury due to
electric shock! First turn off the power supply to the power outlet that the power
adapter is connected to (flip off the fuse and then turn off the residual current op
-
erated circuit breaker to disconnect the power outlet at all phases). Now unplug
the device from the power outlet. Dispose of the power adapter in an environmen-
tally friendly fashion, discontinue use of it immediately.
b) Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the
device.
•
Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you are not sure about the correct connection or use, or if questions arise which
are not covered by these operating instructions, please do not hesitate to contact
our technical support or another qualified specialist.
Operating elements
1
2
6
5
4
3
1 LED power indicator (hidden)
2 Voltage selection switch
3 Power plug
4 Key
5 Low-voltage plug (example)
6 Low-voltage socket
Operating Instructions
ESPS-600-N Power adapter
Item No. 2264183
Intended use
The product is intended for connecting and operating low-voltage appliances with an operating
voltage of 3 / 4.5 / 5 / 6 / 7.5 / 9 / 12 V/DC. A key is used for selecting the respective output
voltage on the power adapter. The product features six different low-voltage plugs suitable for
the most popular connectors. Replugging the polarity of the low voltage plug allows for polar-
ity selection. The power adapter is protected against overload and short circuit. The energy
consumption of the load must nevertheless not exceed the rated power of the product (based
on the voltage setting).
The product is intended for connection to a common household socket with a voltage of
100 - 240 V/AC, 50/60 Hz.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bath-
rooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Power adapter
• 6 x low-voltage plug
• 1 x key-operated switch
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting per-
sonal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) Persons / Product
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• Never leave the product and the connected device unattended during use.
• The accident prevention regulations of the association of commercial insurance
for electrical systems and equipment should be observed in commercial facilities!
