Operating instructions
FPPS 9-7.2W
Plug-in Power Supply
Item no. 2264176
Intended use
The product is used to supply power to electrical
devices. The current consumption of the connected
device must not exceed the maximum output power
of the product.
The product is powered via a standard household
mains socket (100 – 240 V/AC, 50/60 Hz). Use the
product in dry indoor areas only.
The product features short-circuit and overload
protection.
For safety and approval purposes, do not rebuild
and/or modify this product. If you use the product
for purposes other than those described above, the
product may be damaged. In addition, improper use
can result in short circuits, fires, electric shocks or
other hazards. Read the instructions carefully and
store them in a safe place. Make this product avail-
able to third parties only together with its operating
instructions.
This product complies with the statutory national
and European requirements. All company and prod-
uct names are trademarks of their respective own-
ers. All rights reserved.
Package contents
• Power adapter
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the
triangle is used if there is a risk to your
health, e.g. due to an electric shock.
The symbol with the exclamation mark
in the triangle is used to indicate impor-
tant information in these operating in-
structions. Always read this information
carefully.
Safety information
Read the operating instructions
carefully and observe in particular
the safety instructions. If you do not
follow the safety information and in-
formation on proper handling in
these operating instructions, we will
assume no liability for any resulting
personal injury or damage to prop-
erty. Such cases will invalidate the
warranty/guarantee.
a) Persons / product
• The product is not a toy. Keep it out of the reach
of children and pets.
• Do not leave packaging material lying around
carelessly. It may become a dangerous toy for
children.
• Protect the product from extreme temperatures,
direct sunlight, strong jolts, high humidity, mois-
ture, flammable gases, vapours and solvents.
• Do not place the product under any mechani-
cal stress.
• If it is no longer possible to operate the product
safely, stop using it and prevent unauthorised
use. Safe operation can no longer be guaran-
teed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious transport-
related stresses.
• Handle the product carefully. Jolts, impacts or
a fall even from a low height may damage the
product.
• Always observe the safety information and oper-
ating instructions of any other devices which are
connected to the product.
• Never leave the product and the connected de-
vice unattended during use.
• In commercial institutions, the accident preven-
tion regulations of the Employer’s Liability In-
surance Association for Electrical Systems and
Operating Facilities are to be observed!
• Keep the included small parts away from chil-
dren and pets to prevent accidental swallowing.
• Never use the product immediately after it has
been brought from a cold room into a warm one.
The condensation that forms may destroy the
product. The power adapter may also cause a
fatal electric shock! Allow the product to reach
room temperature before connecting it and put-
ting it into use. This may take several hours.
• Never pour liquids over electrical devices or
place objects filled with liquid next to the device.
If liquid or a foreign object enters the interior of
the device nevertheless, first power down the
respective mains socket (e.g. switch off the cir-
cuit breaker) and then pull the mains plug from
the mains socket. Do not operate the product
any more afterwards, but take it to a specialist
workshop.
• Remove the product from the mains socket and
the connected device when you are not using it.
• The product generates heat during use. Ensure
sufficient ventilation and never cover the product
during use.
• The mains socket that the device is plugged into
must be easily accessible.
• Only connect the power adapter to a normal
mains socket connected to the public supply.
Before plugging in the power adapter, check
whether the voltage stated on the power adapter
complies with the voltage of your electricity sup-
plier.
• Never connect or disconnect power adapters if
your hands are wet.
• Never unplug the power adapter from the mains
socket by pulling on the cable; always use the
grips on the plug.
• When setting up the product, make sure that the
cables are not pinched, kinked or damaged by
sharp edges.
• Always lay the cables so that nobody can trip
over or become entangled in them. This poses
a risk of injury.
• For safety reasons, disconnect the power adapt-
er from the mains socket during storms.
• Do not touch the power adapter if there are
any signs of damage, as this may cause a fa-
tal electric shock! Switch off the mains voltage
to the socket containing the power adapter
(switch off the corresponding circuit breaker or
remove the safety fuse, and then switch off the
corresponding RCD protective switch). You can
then unplug the power adapter from the mains
socket. Dispose of the faulty power adapter in
an environmentally friendly manner and discon-
tinue its use.
b) Miscellaneous
• Consult a technician if you are not sure how to
use or connect the product, or if you have con-
cerns about safety.
•
Maintenance, modifications and repairs must be
carried out by a technician or a specialist repair
centre.
• If you are not sure about the correct connection
or use, or if questions arise which are not cov-
ered by these operating instructions, please do
not hesitate to contact our technical support or
another qualified specialist.
Operation
The output voltage of the power adapter must match the input voltage of the connected electrical
device.
1. Connect the output plug to the switched off device. The inner contact is positive
(+)
and the outer contact
is negative
(–)
.
2. Connect the mains plug to a standard household mains socket (100 – 240 V/AC, 50/60 Hz). The LED on
top of the power adapter indicates operational readiness.
3. Now, switch on the connected device. If it does not work properly, turn it off immediately and disconnect
it from the power adapter.
4. Disconnect the power adapter from the mains voltage as soon as you are no longer using it.
Maintenance and cleaning
• Disconnect the power adapter from the mains voltage and from the connected device before cleaning.
• Clean the housing of the power adapter with a dry, soft cloth.
• Do not use abrasives or solvents.
Disposal
This symbol must appear on any electrical and electronic equipment placed on the EU market.
This symbol indicates that this device should not be disposed of as unsorted municipal waste
at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separate-
ly from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by
the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner,
must be removed by end users from the WEEE in a non-destructive manner before it is handed
over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste.
Conrad provides the following return options
free of charge
(more details on our website):
•
in our Conrad offices
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set up by
manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries
outside of Germany.
Technical data
a) Data according to EU regulation 2019/1782
Manufacturer
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Commercial registration number
HRB 3896
Model identifier
FPPS 9-7.2W
Input voltage
100 - 240 V/AC
Input AC frequency
50/60 Hz
Output voltage
9.0 V/DC
Output current
0.8 A
Output power
7.2 W
Average active efficiency
80.6 %
Efficiency at low load (10 %)
75.7 %
No-load power consumption
0.07 W
b) Other
Cable length ......................................... 1.8 m
Protection class .................................... II
Plug Ø ................................................... 5.5 mm (outer)/2.1 mm (inner)
Operating conditions ............................. 0 to +35 °C, 20 – 85% RH (non-condensing)
Storage conditions ................................ -20 to +60 °C, 10 – 90% RH (non-condensing)
Dimensions (W x H x D) ....................... 39 x 68 x 68 mm
Weight .................................................. approx. 68 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, , or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright 2022 by Conrad Electronic SE.
*2264176_v2_0622_02_wl_m_en
