b) Weighing
• Observe the permissible ambient temperatures (Technical data) in order to avoid
incorrect measurements.
• Do not switch the measuring instrument on immediately after it has been taken
from a cold in to a warm environment. The condensation that forms might destroy
your device. Allow the device to reach room temperature before switching it on.
c) Battery instructions
• Batteries should be kept out of the reach of children.
• Do not leave batteries lying around in the open; there is a risk of them being swal-
lowed by children or domestic animals. If swallowed, consult a doctor immediately.
• Leaking or damaged batteries can cause burns if they come into contact with the
skin. You should therefore wear suitable protective gloves.
• Batteries must not be short-circuited, opened or thrown into a fire. There is a
danger of explosion!
• Do not recharge normal, non-rechargeable batteries; they may explode! Only re-
charge rechargeable batteries that are intended for this purpose; use a suitable
battery charger.
• Never mix batteries of different charge states or different brands.
• Please pay attention to the correct polarity (plus/+ and minus/-) when inserting
the batteries.
• Remove batteries from the device if you will not be using it for a longer period.
Controls
1 Sensor
2 Display
3 Operating buttons
4 Display of MAX/MIN values
5 Display Hold
6 Battery indicator
7 Display for measured value
8 Display for measured value factor
9 Display for measuring unit
Inserting/replacing batteries
• Move the battery compartment cover on the back towards OPEN and open it.
• Remove the empty batteries and replace with three 1.5 V AAA/Micro batteries observing the
correct polarity (plus / + and minus / - terminals).
• The correct polarity is indicated inside the battery compartment.
• Close the battery compartment again.
• Battery replacement is required if the battery indicator (6) lights up in the display or if after
switching on there is nothing on the display (2) showing up.
1
2
3
4
5 6
7
8
9
Operating instructions
Luxmeter LX-10
Item no. 1662853
Intended use
The product measures the luminous intensity using the measurement units Lux or Foot-candle
(Fc) and is designed for measurements indoors.
It is intended as a tool to check the luminous intensity by a simple measurement of the luminous
flux and is not suitable for laboratory or scientific purposes.
The maxima or minima can be recorded.
It is powered by batteries.
It may only be used in indoor rooms. Contact with moisture, e.g., in bathrooms or the like, must
be avoided.
For safety and approval reasons, you may not convert and/or alter the product in any way. If
you use the product for other purposes than those described above, the product may be dam-
aged. Furthermore, improper use can cause risks such as short-circuits, fire, etc. Please read
the operating instructions carefully and do not discard them. Please include these operating
instructions when you pass the product on to a third party.
This product complies with the applicable national and European Regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package contents
• Luxmeter LX-10
• Batteries (3 x AAA)
• Operating Instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan
the QR code. Follow the instructions on the website..
Explanation of symbols
An exclamation mark in a triangle indicates important instructions in these operating
instructions that must be adhered to.
The arrow symbol indicates specific tips and advice on operation.
Safety instructions
Please read the operating instructions carefully and pay particular attention
to the safety instructions. We do not assume liability for any injuries/mate-
rial damages resulting from failure to observe the safety instructions and the
information in these operating instructions regarding the proper use of the
product. Furthermore, in such cases, the warranty/guarantee will be null and
void.
a) General Information
• The product is not a toy. Keep out of the reach of children and pets.
• Do not carelessly leave the packaging material lying around. It may become a
dangerous plaything for children.
• Protect the product from exposure to humidity, moisture, extreme temperatures,
direct sunlight, strong vibrations and combustible gases, vapours and solvents.
• Please handle the product carefully. It can be damaged by impact, blows, or by
being dropped, even from a low height.
• If safe operation is no longer possible, take the device out of service and secure
it against unintended use. Safe operation is no longer possible, if the product:
- shows visible damage,
- no longer functions properly,
- has been stored under adverse ambient conditions for an extended period of
time or
- has been exposed to considerable strain during transport.
• On industrial sites, the accident prevention regulations of the association of the
industrial workers’. society for electrical equipment and utilities must be followed.
• Measurement instruments used in schools, training facilities, do-it-yourself and
hobby workshops should not be handled unless supervised by trained, respon-
sible personnel.
• Please consult a specialist if you have any doubts regarding the use or safety of
the product.
• If you have any questions that are not answered in these operating instructions,
please contact our technical customer service or another specialist.
