Troubleshooting
In purchasing the multimeter, you have acquired a
product state of the art design that is operationally reli-
able.
Nevertheless, problems or faults may occur. Which is
why we would like to describe here how you can solve
any problems:
Please, always follow the safety instructions!
Error
Possible cause
Resistance reading
Is the battery flat?
and continuity test
Test the status of the battery
are not possible
and the fuse if required.
No measurement possible
Is the fuse faulty?
Check the fuse (fuse replacement)
No change in
Is the right measuring range and measuring
measured value.
mode selected (AC/DC)?
Incorrect measured values
Did you perform a zero adjustment of the
are displayed.
display or a 0-Ohm calibration for resistance
measuring before startinng the measure-
ment?
Repairs, other than those just described, should only be
carried out by an authorised specialist.
Should questions arise concerning the use of the measur-
ing device, feel free to contact our technical support at the
following phone number:
Voltcraft®, 92242 Hirschau, Lindenweg 15,
tel. no. 0180 / 586 582 7.
51
