1.Safety Information
2
General Safety Requirements
Before any operations, please read the following safety precautions to avoid any
possible bodily injury and prevent this product or any other products connected from
damage. In order to avoid any contingent danger, this product is only used within the
range specified.
Use Proper Power Cord.
Use only the power cord supplied with the product and
certified to use in your country.
Product Grounded.
This instrument is grounded through the power cord grounding
conductor. To avoid electric shock, the grounding conductor must be grounded. The
product must be grounded properly before any connection with its input or output
terminal.
Limit operation to the specified measurement category, voltage, or amperage
ratings.
Check all Terminal Ratings.
To avoid instrument damage and the risk of electric shock,
check all the Measurement Limits and markers of this product. Refer to the user's
manual for the Measurement Limits before connecting to the instrument. Do not
exceed any of the Measurement Limits defined in the following section.
Do not operate without covers
. Do not operate the instrument with covers or panels
removed.
Use Proper Fuse.
Use only the specified type and rating fuse for this instrument.
Avoid exposed circuit
. Do not touch exposed junctions and components when the
instrument is powered.
Do not operate if in any doubt.
If you suspect damage occurs to the instrument,
have it inspected by qualified service personnel before further operations.
Use your instrument in a well-ventilated area.
Inadequate ventilation may cause
increasing of temperature or damages to the device. Please keep well ventilated and
inspect the intake regularly.
Do not operate in wet conditions.
In order to avoid short circuiting to the interior of
the device or electric shock, please do not operate in a humid environment.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry.
Only the qualified technicians can implement the maintenance.
