Introduction
Dear Customer,
In purchasing this Voltcraft® product, you have made a very good decision for which
we should like to thank you.
You have acquired an above-average quality product from a brand family which has
distinguished itself in the field of measuring, charging and network technology by
particular competence and permanent innovation. With Voltcraft®, you will be able
to cope even with difficult tasks as an ambitious hobbyist just as much as a profes-
sional user. Voltcraft® offers you reliable technology at an extraordinarily favourable
cost-performance ratio. We are certain: Your start with Voltcraft will at the same time
be the commencement of a long and profitable co-operation. We wish you much
enjoyment with your new Voltcraft® product!
If there are any technical questions, contact:
Germany:
Tel. no.:
+49 9604 / 40 88 80
Fax. no.:
+49 9604 / 40 88 48
E-mail: tkb@conrad.de
Mon. to Thur. 8.00am to 4.30pm, Fri. 8.00am to 2.00pm
To maintain the specifications and to ensure risk-free operation, the user should
comply with the following operating instructions!
Intended Use
- Measuring direct voltages up to a maximum of 600VDC
- Measuring alternating voltages up to a maximum of 600VACrms
- Measuring direct or alternating currents up to a maximum of 20A, for a maximum
period of 10s with pauses of 15min between the single measurements
- Measuring capacities of up to a maximum of 100µF
- Measuring frequencies of up to 10MHz and measuring the pulse-pause-ratio (duty
cycle, informative)
- Measuring resistance values up to a maximum of 40 MOhm
- Testing diodes and checking the acoustic continuity
- Overvoltage category CAT III 600V
Use other than that described above will lead to damage to the measuring instru-
ment and additional risks, such as short circuit, fire, electric shock etc. No part of the
product may be changed or modified! The safety instructions should be observed
without fail!
21
