33
6. PRODUCT DESCRIPTION
The multimeter (referred to as DMM in the following) indicates measured values on a digital display that can be
illuminated. The measured value display of the DMM comprises 2000 counts (count = smallest display value).
The meter can be used for do-it-yourself or for professional applications up to CAT III.
There are transport protection caps in the angled plugs of the enclosed measuring lines. Remove them before push-
ing the plugs into the meter sockets.
At the rear, there is an unfolding setup bracket (8) with which the DMM can be set up inclined. This makes it easier
to read the display.
An automatic deactivation function switches off the multimeter independently if it is not used for an extended period.
This protects the battery and extends its service life.
Every time the dial switch is pushed and the function is switched, there will be a beep for confirmation.
Dial switch (4)
The individual measuring functions and ranges are selected via a dial switch.
If the multimeter switch is set to “OFF”, the meter is switched off. Always turn the meter off when it is not in use.
