70
14. Technical data
Display ..............................................................6000 counts (digits)
Measuring rate ..................................................approx. 2 - 3 measurements/second
AC measurement method .................................True RMS, AC-coupled
Test lead length ................................................approx. 90 cm
Measuring impedance ......................................≥10 MΩ//10 pF (V range)
Measurement socket clearance ........................19 mm (COM-V)
Low battery indicator ........................................Battery voltage ≤6 V
“Dangerous voltage” indicator ..........................≥30 V/AC-DC
“Range exceeded” alarm ..................................≥600 V/AC-DC, >10 A/AC-DC
“OL” (overload) alarm .......................................≥610 V/AC-DC, ≥10 A/AC-DC or measurement >6600 counts
Automatic shut-off .............................................after approx.15 minutes (can be manually disabled)
Current consumption (auto off) .........................<30 µA
Operating voltage .............................................9 V block battery
Operating conditions .........................................0 to +40 °C (<75% RH)
Operating altitude .............................................max. 2000 m above sea level
Storage temperature .........................................-10 °C to +50 °C
Weight ..............................................................approx. 380 g
Dimensions (L x W x H) ....................................178 x 85 x 40 mm
Measuring category ..........................................CAT III 600 V
Pollution degree ................................................2
Safety regulations ............................................meets EN 61010-1
DMM measurement tolerances
Accuracy in ± (% of r display error in counts (= number of smallest points)). The accuracy is valid for one
year at a temperature of +23 °C ± 5 °C, and at a relative humidity of less than 75%, non-condensing. Temperature
coefficient: +0.1 x (specified accuracy)/1 °C outside the specified temperature range.
The accuracy of measurements may be affected when the multimeter is used in a high-frequency electromagnetic
field.
