S
AFETY
I
NFORMATION
Power Analyzer User Manual
© Voltech 2010
Page
83
9. S
AFETY
I
NFORMATION
9.1.
S
AFETY
F
EATURES
The has been designed with safety features, such as shrouded safety
connectors, that provide the operator with a high level of protection against the risk of
electric shock. As with any dangerous equipment, however, it is important that an
assessment of the overall risk to safety is made during installation. It is the use
r‟s
responsibility to ensure compliance with any local regulations that may be applicable to
the health and safety of operators.
If the is used in a manner not specified by Voltech Instruments, Inc., the
protection provided by the equipment may be impaired.
9.2.
S
AFETY
I
NSTRUCTIONS
The and its accessories have been constructed in compliance with the
requirements of EN61010-1, Pollution Degree 2, Installation Category II, FOR
INDOOR USE ONLY. This ensures the safety of the analyzer and the user when
normal precautions are followed.
WARNING: The analyzer MUST be earthed. The power source should be inserted
in a socket with a protective ground contact.
The power source should be inserted before connections are made to measuring or
control circuits.
Do not attempt to remove outer cover without first disconnecting auxiliary and test
power supply.
This instrument must only be serviced by qualified personnel who understand the
danger of shock hazards.
When the instrument is removed from its case hazardous voltages are present.
The electronic circuitry of this instrument is fully floating with respect to ground. If
the instrument is opened and dangerous voltages (above 50V peak) applied to the
input terminals then all the circuitry must be considered 'Live'.
!
