background image

From the image , you can see the cable length is 95.6M , press              return the main menu 

and start other testing.

Test result 6: 6-core telephone cable with short circuit 

When test Telephone cable length 

,connect one end of cable to port “RJ11" 

No connection to the other end  choose menu of 

“cable length” for "RJ11" the result will show as below.

The cable length is 95.6M, #1 & #2 has a short circuit in the location of 30.8M.

Test result 7: BNC cable length test

 When test BNC cable length ,connect one end of cable 

to port“BNC" 

No connection to the other end

 choose menu of “cable length” for "BNC"the 

result will show as below. 

This result show you the cable length is 60.2M , press              back to main menu and enter 

other testing.

Test result 8 : BNC cable length test with short circuit

 When test BNC cable length 

,connect one end of cable to port“BNC" 

No connection to the other end

 choose menu of “cable 

length” for "BNC"the result will show as below. 

This result show you the cable length is 20.7M , press           back to main menu and conduct 

other testing.

Calibration: eg: Network cable

 

Due to different technical parameters with  different branded cables, users are recommended 
to use dynamic calibration function of the equipment before measuring length (Refer to the 
related chapter for more details).

RJ11 

 

Length 

1   Open      95.6m

2   Open      95.6m

3   Open      95.6m

4   Open      95.6m

5   Open      95.6m

6   Open      95.6m

Total  length:

95.6m

1 O p e n                5 0 . 8 m
2 O p e n                5 0 . 8 m
3 O p e n                1 0 5 . 3 m
4 O p e n                1 0 5 . 3 m
5 O p e n                1 0 5 . 3 m
6 O p e n                1 0 5 . 3 m
7 O p e n                1 0 5 . 3 m
8 O p e n                1 0 5 . 3 m
s h o r t e n l o c a t i o n f o r P i n 1 2 :
T o t a l l e n g t h : 1 0 5 . 3 m

RJ11 

 

Length 

1   Short      30.8m

2   Short      30.8m

3   Open      95.6m

4   Open      95.6m

5   Open      95.6m

6   Open      95.6m

Short  mapping:

12Short-L: 30.8m

Total  length:

95.6m

BNC 

 

Length 

1   Open      60.2m

2   Open      60.2m

Total  length:

60.2m

BNC 

 

Length 

1   Short      20.7m

2   Short      20.7m

Short  mapping:

12Short-L: 20.7m

Total  length:

20.7m

Summary of Contents for S-NET1





















Reviews: