30
Voltima – SunCase Plus
Installation
Place the solar module in a location with sunlight that is free of branches and other obstacles.
Unfold the module and make sure that the solar module is facing the sun.
This will maximise the power output of the module.
Connect the module to the appropriate inputs of a compatible solar charge controller.
Connect the battery you wish to charge to the correct outputs of the charge controller.
Make sure that all connections are secure and avoid short circuits.
Compatible batteries and devices
With a suitable charge controller, this solar module can be used to charge or power the
following batteries and devices:
•
Sealed lead-acid batteries
•
Colloidal lead-acid batteries
•
Lead-acid batteries (wet)
•
Lithium batteries
•
Mobile phones
•
Tablets
•
Navigation systems, etc.
Clean the surface of the solar panel
Remove dust and dirt from the surface of the solar module with a soft brush and then wipe it
clean with a damp cloth.
Bird droppings should be removed as soon as possible to avoid a negative effect on the
performance of the solar module.
Summary of Contents for SunCase Plus 100
