Checking Protective Anodes
Check the anodes on the drive every time the boat is
out of the water. Replace anodes when 50% of the
anode has been consumed.
When the boat is out of the water, corrosion protection
deteriorates due to anode oxidization. Even new
anodes may have some surface oxidation. Therefore
always clean and polish them with an emery cloth
before launching.
Replacement of anodes
•
Clean the contact surfaces on the new anode.
•
Install and tighten the halves so that they make good
contact with the surface of the drive/each other.
Transmission, Sterndrive
68
47708114 06-2021 © AB VOLVO PENTA