96
Cooling system
Remove the bleed plug from the hot water connec-
tion (B1) or the plug (B2) on the heat exchanger.
2
Remove the filler cap (B3) from the coolant tank
and fill the tank with coolant to the level of the filler
pipe.
3
Install the ventilation plug and the filler cap.
4
Start the engine. Stop it when it has reached normal
operating temperature and let it cool.
5
Remove the filler cap from the coolant tank and fill
with coolant to the level of the filler pipe. Install the
filler cap.
NOTE! If the circuit is topped up with coolant, it
must have the same composition as the coolant al-
ready being used in the system.
Coolant, filling (20A-2)
Applies to MD22A, MD22L-A, TMD22A
1
Coolant, filling (20A-2)
Applies to MD22L-B, MD22P-B, TMD22-B,
TMD22P-C, TAMD22P-B
1
Remove the bleed plug from the outlet connection
for the coolant (B2).
2
Remove the filler cap (B1) from the coolant tank
and fill the tank with coolant to the level of the filler
pipe.
3
Install the ventilation plug and the filler cap.
4
Start the engine. Stop it when it has reached normal
operating temperature and let it cool.
5
Remove the filler cap from the coolant tank and fill
with coolant to the level of the filler pipe. Install the
filler cap.
NOTE! If the circuit is topped up with coolant, it
must have the same composition as the coolant al-
ready being used in the system.
Summary of Contents for MD22
