Trip Reset
Zeroes all values in the trip computer.
ACP Mode
Setting the ACP protection position. For information on
the ACP function, refer to the chapter entitled
Optional
.
Depth Alarm
Setting the depth alarm function; refer to
Depth
Alarm
in this chapter.
Display Contrast
Contrast adjustments affect all displays in the system.
Display Type
Select the which engine’s information will be displayed
and the type of installation of which the display forms
a part.
Units
Setting the units (metric, US or Imperial) and distance
units (km, NM or miles) distances will be shown in.
Language
Setting the language in which information will be
shown.
Speed Factor
Setting the speed factor; refer to
Log Cal. Factor
in this
chapter.
EVC Information
Information about components, software, and func-
tions installed. Installed functions are checkmarked.
Warning Manager
If the system discovers a fault, the helmsman is
informed by a message on the display. The fault mes-
sage must be acknowledged by pressing OK.
All fault messages are stored in
Warning Manager
;
the drivetrain affected is shown, the fault described and
suitable actions suggested. For further information on
different fault messages, refer to
Fault Code Register
.
Instruments and Controls
47706354 08-2015 © AB VOLVO PENTA
33
