20
IMG-231479
Take the hose clamp from the kit and fit it onto the engine block
heater's upper connection.
21
IMG-231480
Position the engine block heater with bracket in the front edge of
the oil sump and connect both hose-ends to the engine block
heater's connections.
Take a screw from the kit and tighten the bracket with engine
block heater into the existing hole in the oil sump.
Note!
The screw is self-tapping so inserting it may be slow. Make
sure that the screw is centred straight into the hole, so that the
screw head is flat against the bracket.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Electric engine block heater, 110V, 6-cyl- 30661683 - V1.2
Page 15 / 18
