22
IMG-231704
Now adjust the engine block heater in the rubber coated clamp
so that the hoses are properly fitted on the engine block heater's
connections.
Tighten the screw to the rubber coated clamp.
Tighten the hose clamps to the engine block heater.
23
IMG-231705
Take five double tie straps from the kit and secure them on the
pipe and hose to the thermostat housing as well as the lower
hose to the radiator.
Check that the cable does not chafe against sharp edges or
moving parts in the engine compartment.
Caution!
Do not clamp the cable directly to brake pipes, fuel lines, AC
pipes or pipes to the power steering.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Electric engine block heater, 110V, 6-cyl- 30661683 - V1.2
Page 16 / 18