53
IMG-279987
Insert a piece of wire on the left-hand side by the air vent and
pull it out down by the tunnel console's left-hand side.
Tape the cable harness connector and a piece of the cable at
the wire. Pull it upwards and out through the hole for the air vent.
Note!
Route the cable harness so that there is no risk of wear.
54
IMG-279988
Route the cable from the holder and connect its connector to the
routed cable harness connector.
Position the entire cable harness underneath the air vent in such
a way that it does not get trapped when the air vents are
reinstalled.
Secure the two green connectors using a piece of butyl tape in a
suitable position to prevent rattling.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Navigation system, portable- 30756311 - V1.4
Page 31 / 71