39
38
19
The arrow on the details
is directed to the front
side greenhouse
1050
№47 from
«box 2 SIGMA»
2 pc х 1,05 m
1050
!
do not fully tighten!
№46 from
«box 2 SIGMA»
!
tighten!
№56 from
«box 2 SIGMA»
1 pc.
№50 from
«box 2 SIGMA»
1 pc.
№16 from
«box 1 SIGMA»
2 pc.
Cellular polycarbonate panels are installed with a certain surface, which has
a protective layer, outside (towards the sun). The protective layer usually has a
side with the inscriptions on the transportation film. The other side of the film is
transparent. Mark the protective side of the sheet in each panel because after
removing the transportation film, the sides of the panel do not visually differ.
The transportation film should be removed from both surfaces before fixing the
glazing on the frame.
It is necessary to stick the
adhesive tape over the open
polycarbonate shearing surfaces
№46 from
«box 2 SIGMA»
№49 from
«box 2 SIGMA»
4 pc.
№57 from
«box 2 SIGMA»
4 pc.