1-1/16" (27.0 mm)
HORIZONTAL
ø3/4" (ø19.0 mm)
WIRE ACCESS HOLE
PLACE THIS EDGE
AGAINST CLOSED DOOR
MOUNTING
HOLES
DRILL #7
(0.201")
TAP 1/4-20 UNC
(2 PLACES)
4-1/8" (104.8 mm)
5/8" (15.9 mm)
4-1/8" (104.8 mm)
CENTERLINE
23/32”
(18.0mm)
R
INSTRUCTIONS
1. Determine the horizontal centerline of the exit device
latch and transfer centerline to the frame stop.
2. Position the template onto the frame aligning with
centerline and against the closed door. Center-punch
the two mounting holes and the wire access hole as
shown.
3. Drill and tap the two mounting holes and drill the wire
access hole.
4. Refer to the installation instructions for wiring and final
installation.
COPYRIGHT © 2010 INGERSOLL-RAND. ALL RIGHTS RESERVED.
SURFACE MOUNTED RIM STRIKE
6300 TEMPLATE
T6300 PCN10031
R06/10SH
Exit
Device
Door
Edge
R
cL
For those exit devices where
R
=
11/32” (9.0mm)
shift template accordingly.
IRT6300_R0610.qxd 6/18/10 10:34 AM Page 1
