FAX version 911374_00(2) Page 4 of 9
5
1
2
3
4
RHR Shown
(LHR Opposite)
CL
39-5/8”
to finished
floor
Align template along center
line (C
) and mark door.
CL
Prepare 4 center case
holes and cutouts.
See “Preparation Chart”on page 3 for drill,
tap, and cut-out information
Install mortise lock
into door.
Mortise lock
Draw horizontal device
center line (C
).
L
See “#941019, 7500 mortise lock instructions”
L
2-3/4”
Backset
See “Screw
Chart” on page 2
for screw types
and sizes
A
Device
template
Mark 4 holes
Mark
vertical CL
X
X
See trim instructions for
pull side door preparation.
With TP, K, and L trims with outside
cylinder to lock and unlock trim function,
turn this set screw all the way in
With EO, DT, NL, and “double
cylinder” applications, screw
remains as shipped
