USAGE
SETTING AN UNLOCK CODE
Open the Safe door and locate the protruding button
press to begin.
•
The Safe will beep. The Orange Indicator Light
will illuminate for approx 20 seconds.
•
During this period, select and enter an unlock
code between 3-8 digits long and press the “
A
or B
” button to assign the code.
•
If successful, the Safe will confirm with beeps.
NOTE:
It is recommended that your unlock code be
easily memorable but should not be personal infor-
mation such as birthdays, anniversaries, telephone
numbers etc. as these may be easy to guess and
compromise the security of the Safe.
OPENING THE SAFE USING THE UNLOCK CODE.
•
Once an unlock code has been set, the Safe can
be opened by entering the unlock code using
the Electronic Keypad
(4)
and confirming the
code by pressing “
A or B
”.
•
The Orange Indicator Light will illuminate to
acknowledge the input of each number. If
the correct code is entered the safe will beep
and the locking mechanism will disengage for
approx. 5 seconds.
•
During this period, turn the Locking Handle
(6)
clockwise
(right)
and then open the Safe.
NOTE:
If the user has entered an incorrect code, the
Orange Indicator Light will illuminate. The user must
enter the code again. Inserting the wrong code 3
times in a row will lock the electronic keypad for 20
seconds.
LOCKING THE SAFE
Close the Safe door and turn the Locking Handle anti-
clockwise
(left)
to engage the locking mechanism.
QUICK SET UP
1.
Open the door with key, (lock is located behind the Lock Cover
(5)
.
2.
Insert batteries .
3.
Press the Reset Button (located inside the safe).
4.
Insert desired code followed by
“A”
or
“B”
buttons.
5.
To unlock use the code followed by the
“A”
or
“B”
buttons.
