FITTING THE BACKING PAD
The Backing Pad must be securely fitted to the
SPINDLE (14)
before use:
•
Use the
LOCKING SPANNER (8)
to hold the
SPINDLE (14)
thread secure
•
Rotate the
BACKING PLATE (1)
in a clockwise direction to secure the
BACKING PAD (1)
to the
SPINDLE (14)
assembly.
•
To remove, use the
LOCKING SPANNER (8)
to hold the spindle thread secure. Rotate the
BACKING PAD (1)
in an anti-clockwise direction to remove.
BEFORE FIRST USE
IMPORTANT
Always ensure the Polisher is disconnected from the mains supply before
performing any maintenance, cleaning or assembly tasks.
8
1
14
