45PC METAL
PEGBOARD SET
3500080 - User Guide
The Pegboard is designed and intended for domestic use only. It should not be used for
commercial purposes.
This product is not a toy. Children should be supervised to ensure that they do not play
with the Pegboard.
CAUTION:
This product contains small parts for assembly which pose a hazard to children
and animals. Keep away from children and pets at all times.
Check the contents of the packaging against this manual to ensure there are no missing
or defective parts. Never use defective parts.
To protect parts from damage during assembly, it is recommended that you clear
sufficient space to assemble the unit. Place all parts on a suitable sheet or rug to prevent
scratching or damage to the parts and flooring during assembly.
It is recommended that two people are present for assembly.
Do not use power tools for assembly. These can cause damage to the product and impair
future use and stability.
Do not over-tighten any parts during assembly. This will damage the unit.
WARNING!
The Pegboard should only be positioned on a flat wall surface.
Due to the difference in wall materials, the required hardware for fixing the Pegboard to
the wall are not included. Contact your local hardware store or qualified person for advice
and guidance.
Keep the Pegboard away from open flames or sources of ignition.
The Pegboard is not designed to support excess weight.
DO NOT
climb on or overload the unit to prevent accident or injury.
DO NOT
overload the Pegboard.
Take care to observe and adhere to the following weight capacities:
Maximum combined weight 20Kg / 44lbs
Maximum Weight per hook 1kg / 2.2lbs
For stability, heavier items should not be placed in the lower region of the PegBoard.
Always distribute weight evenly to help prevent damage and tip-over.
CAUTION:
To ensure continued safety, check that the unit is secure and safe to use at
regular intervals (every 3 months). Take appropriate action to rectify any unstable or
unsafe units.
WARNING
WALL MOUNTING
I
MPORTANT
When drilling into walls always check that the there are no hidden
wires or pipes etc.
Ensure that the screws and wall plugs being used are suitable for supporting the
unit to be installed.
If you are unsure it is recommended you contact a suitable qualified tradesperson.
TIPS
• Ensure you use a recommended drill bit to match the wall plug and hole size.
• Take extra care when drilling high walls, ceilings and ceramic tiles, ensure the wall
plug is fitted below the ceramic tile to avoid splitting or cracking.
• Ensure the wall plugs are well fitted and are a secure fit to the drilled hole.
Standard Wall Plug:
Suitable for use on most types of
wall such as brick, breeze block, concrete, stone, wood
or plaster.
Hammer Fixing:
For use with wall stuck with plaster
board. The Hammer fixing allows it to be fixed to a wall
rather than the plaster board.
Cavity Fixing Heavy Duty:
For use when supporting
heavy loads for example cabinets and shelving.
Cavity Fixing:
For use with plaster board partitions or
hollow wooden doors.
Shield Anchor:
For use with heavier items such as TVs.
Standard Wall Plug:
Suitable for use on most types of
wall such as brick, breeze block, concrete, stone, wood
or plaster.
