BENCH MOUNTING
DUST EXTRACTION
If the Spindle Sander is to be used in a permanent
position, it is recommended that you secure it to a
rigid work surface.
Use the holes in the base of the Spindle Sander as a
template to mark and drill four holes in your intended
mounting surface (ie workbench). Secure the Spindle
Sander into position using large bolts, washers and
nuts (not supplied).
If the Spindle Sander is intended to be more portable,
fix a board to the base which can be easily clamped
and removed from various mounting surfaces
If using bolts make sure they are long enough to
penetrate the workbench or board sufficiently for a
secure fix.
NOTE:
Use nylon insert lock nuts or spring washers
in the fixings to prevent vibration from loosening the
fixings.
NOTE:
Never use bolts that require force to push
through the Bench Mounting Holes as these may
crack the plastic body as will over-tightening the
fixings.
It is recommended that the Spindle Sander is used
with a dust extraction system for a cleaner and safer
work environment.
Attach the hose from the dust extraction system to
the Dust Extraction Port
(13)
and ensure it is secure.
For greatest efficiency, activate the dust extraction
system before turning on the Spindle Sander.
