VonHaus 3500181, Manual

A5P | 01

locked unit. 

Make sure that the cord is located so that it will not be 

stepped on, tripped over, or otherwise subjected to dam-

age or stress.

Remove the plug from the mains socket / battery (where 

applicable) before carrying out any adjustment or main-

tenance.

Always store the power tool/machine in a dry place.

If the power cord is damaged, it must be replaced by a 

qualified service technician. 

Keep the ventilation slots and motor housing as free of 

dirt and dust as possible (where applicable).

Clean the power tool/machine by rubbing it with a clean 

cloth and blow it clean using low-pressure compressed 

air is recommended.
Ensure you have all the pieces listed. If you are missing 

any components, contact our customer services depart-

ment at 

hello@domu.co.uk (UK/EU) 

usasupport@domubrands.com (US).  DO NOT proceed 

with assembly if any components are missing.
HAND HELD SANDERS & POLISHERS

For Belt Sanders, Drum Sanders and polishers, the 

direction of rotation shall be indicated on the tool by an 

arrow, raised or sunk, or by any other means no less 

visible and indelible. Hold the Power Tool by insulated 

gripping surfaces when performing an operation where 

the fastener may contact hidden wiring or its own cord. 

Fasteners contacting a ‘live’ wire may make exposed 

metal parts of the power tool ‘live’ and could deliver an 

electric shock.

TECHNICAL SPECIFICATION
Rated Voltage 230-240V~ 

Rated Power 370W 

Rated Frequency 50Hz

No Load Speed 2980/min

0mm

10mm

10mm

20mm

20mm

M8 X1.25MM