9
OPERATION
The Nail & Staple Gun has 2 firing modes;
Single
Firing Mode
and
Contact Firing Mode.
These are selected by adjusting the Firing Mode
Selection Switch
(6)
on the tool.
CONTACT FIRING MODE.
This mode is best for convenient and quick firing.
1. To use this mode, push the Firing Mode Selection
Switch
(6)
to the
Contact Firing
position.
2. Squeeze the Trigger Switch
(7)
and keep this held.
3. Depress the Safety Contact
(3)
against the
workpiece to fire the nail/staple; keep the Trigger
Switch held at all times but release the Safety Contact
after firing.
4. Repeat the steps to continue.
CAUTION:
Do not keep the Trigger Switch depressed
when the tool is not in use as this invites accidents
and injuries.
SINGLE FIRING MODE.
This mode is best for precision placement.
1
.
To use this mode, push the Firing Mode
Selection Switch
(6)
to the
Single Firing
position.
2. Depress the Safety Contact
(3)
against the
workpiece.
3. Squeeze the Trigger Switch
(7)
to fire the
nail/staple. Release the Trigger Switch and
Safety Contact after firing.
4. Repeat the previous steps as necessary to
complete your task.
7
6
