WARNING
PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE
clothing and gloves away from moving
parts to prevent them from becoming
caught in the tool.
IMPORTANT SAFETY INFORMATION
FOR USE.
WARNING!
Know your 2 in 1 Nail and
Staple Gun. Do not plug the tool into
the power source until you have read
and understand the information in this
manual. Learn the tool’s applications
and limitations, as well as the specific
potential hazards related to the tool, to
reduce the risk of electric shock, fire or
serious injury.
Use the power tool, accessories and
tools bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
Only use accessories designed for use
with the tool.
Secure the workpiece. Use clamps or a
vice to hold the workpiece as this is safer
than using your hand and frees both
hands to operate the tool.
Do not use the power tool if the switch
does not turn it on and off. A power tool
that cannot be controlled with the switch
is dangerous and must be repaired.
Do not force the power tool. Always
use the correct power tool for your
application. The correct power tool will
do the job better and safer at the rate for
which it was designed.
Do not overreach. Keep proper footing
and balance at all times. This will enable
better control of the power tool in
unexpected situations.
Disconnect the plug from the power
source and/or the battery back from
the power tool before making any
adjustments, changing accessories
or storing. Such preventative safety
measures reduce the risk of starting the
power tool accidentally.
Store idle power tools out of reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the tool. Power
tools are dangerous in the hands of
untrained users.
Maintain the power tool. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect operation. If damaged,
have the power tool repaired before use.
Many accidents are caused by poorly
maintained power tools.
ADDITIONAL SAFETY INFORMATION
FOR THE CHARGER.
Tools with Lithium-ion batteries may only
be charged with the specifically designed
Lithium-ion battery charger purchased
with this tool. Do not attempt to charge
the battery pack with any charger other
than the one supplied as this is potentially
dangerous.
Before using the charger, read all
instructions, labels and cautionary
markings on the charger and battery
pack, as well as the instructions on using
the battery pack.
Do not use the charger for any purpose
other than that for which it is intended.
Do not use the charger to charge any
device other than the battery it was sold
with.
Do not use an extension cord unless
absolutely necessary. The use of an
improper extension cord could result in
fire or electric shock.
Never attempt to connect two chargers
together.
Use the battery charger indoors only.
Make sure that the charger cable is
positioned where it will not be stepped
